.png){kind=logo}
Hỗ trợ trực tuyến
-
MR NGỌC ANH
0987900297 -
Quốc Toản
0977.164.801
Đối tác & khách hàng
.jpg)
Media Converter OPT- 201P
- Introduction:
OPT-201Pis designed a 10/100/1000Base-T to 1000Based-SX/LX (SC/LC) GbE media converter, which allows two types of network segments to be connected easily and inexpensively. Complied with IEEE802.3af Power Over Ethernet standard, this AC powered PoE media converter is a Power Sourcing Equipment (PSE) which combines data received over a TP link with –48VDC power, providing power to IEEE802.3af powered device (PD) over the existing CAT5 UTP cable. The converter includes a PD signature sensing and power monitoring features. Other features include over-current protection, under-current detection and fault protection input. The LFP (Link Fault Pass-through) allows the media converter to monitor both the fiber and copper RX ports for loss of signal. In case of a loss of RX signal on one media port, the converter will automatically disable the TX signal to the other media port, thus passing through the link fault. FEF (Far End Fault) enables the converter to stop sending link pulse to the link partner once a loss of the fiber RX signal is encountered. Then the link partner will synchronously stop sending data. FEF prevents loss of valuable data transmitted over invalid link. Combining LFP and FEF troubleshooting features of PSGC-110A, both end devices can be notified of a loss of fiber link.
Key Features
IEEE802.3af PoE (Power over Ethernet) PSE compatible
Standards
Cable
|
|
Multi-Mode Fiber
62.5/125μm |
Multi-Mode Fiber
50/125μm |
||
|
|
Bandwidth
MHz-Km |
Distance
|
Bandwidth
MHz-Km |
Distance
|
|
1000SX
850nm |
160
|
220m
|
400
|
500m
|
|
200
|
275m
|
500
|
550m
|
|
|
1000LX
1310nm/1550nm |
Single-Mode Fiber 9/125μm
Single-Mode transceiver 1310nm: 10/30Km Single-Mode transceiver 1550nm: 50Km |
|||
|
TP Port |
10/100Base-TX
Auto-Negotiation Auto-MDIX Flow control for Full-Duplex Backpressure for Half-Duplex |
|
TP Port
|
1000Base-TX
Auto-Negotiation mode (( Auto-MDIX only for Auto-Negotiation
Flow control for Full-Duplex only |
|
Fiber Port
|
1000Base-SX/LX (SFP)
with NWay flow control Link partner must be 1000FDX with NWay flow control |
LED Indicator
|
LED |
Color
|
Function
|
|
FX LNK/ACT
|
Green
|
Lit when fiber connection is good
Blinks when fiber data is present
|
|
TP LNK/ACT
|
Green
|
Lit when TP connection is good
Blinks when TP data is present
|
|
TP SPD
|
Green
Yellow
|
Green Lit when TP speed is 1000Mbps
Yellow Lit when TP speed is 100Mbps
Off when TP speed is 10Mbps
|
|
PWR
|
Green
|
Lit when +5V power is coming up
|
|
PoE PSE-TP
|
Green
|
Lit when PoE feeding power is active
|
|
Red
|
Lit when PoE feeding power is disrupted
(In case of overtemperature/overcurrent )
|
|
|
4W
|
Green
|
Light when PD Class Type is Class 1
|
|
7W
|
Green
|
Light when PD Class Type is Class 2
|
|
15.4W
|
Green
|
Light when PD Class Type is Class 0 or 3
|
Hardware Spec
|
Feature |
Detailed Description
|
|
Power Characteristics
|
Requirement :100 – 240 VAC, 47 –63 Hz
Consumption :Max. up to 19W
|
|
Ambient Temperature
|
0 ~ 50°C
|
|
Humidity
|
5 ~ 90％
|
|
Dimensions
|
40 (H) x 158 (W) x 133 (D) mm
|
|
Weight
|
0.6kg
|
|
EMI
|
Comply with FCC Part 15 Class A & CE Mark approval
|
