Media Converter OPT-2206

- Introduction:
OPT-2206 provide 6-port Gigabit Switch with Adaptive 4 x10/100/1000M RJ45 ports and 2x1000M standard SFP fiber port, users may need to use different SFP modules, such as 1000Base-T, 1000Base-SX, 1000Base -LX and so on. Switch by the United States the latest Marvell IC, stable performance and excellent quality, with a higher cost. For small optical Ethernet and optical network with special needs.
Features
- Provides 4-Port 10/100/1000 Mbps RJ-45 and 2-port GIGA SFP fiber ports- Conforms to IEEE 802.3 10BASE-T, IEEE802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T and IEEE 802.3x flow control standards- SFP port supports 1000BASE-SX/LX modules- Supports 10/100Mbps auto-detect half/full duplex and 1000Mbps at full duplex- Supports TP interface auto MDI/MDI-X function for auto TX/RX swap- Supports 802.3x flow control pause packet for full duplex- Supports up to 10K Byte Jumbo frames- LEDs to indicate: 10/100/1000Mbps, Link/Act. and Power Status- Slim & Compact design- RoHS ComplianceTechnical Specification
- Standard compliance :- IEEE 802.3 10Base-T Ethernet(twisted-pair copper)- IEEE 802.3u 100Base-TX Ethernet(twisted-pair copper)- IEEE 802.3ab 1000Base-T Ethernet(twisted-pair copper)- IEEE 802.3Z 1000Base-T Ethernet(Gigabit Fiber)- ANSI/IEEE 802.3 Auto-negotiation- MAC Address : 1K- Network Interface : 4 x10/100/1000Mbps RJ-45 ports- Media :- 10BASE-T: UTP Cat. 3, 4, 5 or up- 100BASE-TX: UTP Cat. 5 or up- 1000BASE-T: UTP Cat. 5 or up- fiber multi-mode:50/125,62.5/125μm(distance up to 550/224M)- fiber single-mode:8/125,8.7/125,9/125μm(distance up to 10~100KM)- Transmission Mode : 10/100Mbps, full/half-duplex (Auto-sensing)- Buffer Memory : 1Mbit on chip frame buffer- Switching Method : Store & forward- Size: 31(H)×102(W)×144(L)mm
- LED Description
|
|
LED |
Color |
Function |
|
Global |
POWER |
Green |
Lit when +5V power is coming up |
|
TP Port 1-4 |
LINK/ACT |
Green |
Lit when connection with remote device is good Blinks when any traffic is present |
|
TP Port 1-4 |
1000/100Mbps |
Green/Amber |
Lit Green when TP link on 1000Mbps speed Lit Amber when TP link on 100Mbps speed Off when 10Mbps or no link occur |
|
SFP port1,2 |
SFP1,2 |
Green |
Lit when SFP connection is good Blinks when SFP data is transmitting |
- Ordering:
|
Model No. |
Description |
|
OPT-2206 |
4x10/100/1000M + 2x SFP ports |
.png)



.jpg)





